How to fill an electronic cigarette correctly

click fraud protection

Having taken a decision on the transition from tobacco cigarettes to electronic analogs, you are making the first step to unconditional victory over a bad habit. The choice of a suitable device should be approached thoroughly and seriously. To begin with it is necessary to study varieties, the principle of action, to find out what and how to fill an electronic cigarette. All these questions we will consider in a new article.

The habit of smoking tobacco: what can replace it

The main problem of smoking cigarettes is the dependence on nicotine, the strength of resistance that can be compared with the drug. Cope with the negative habit can not all, not everyone has enough restraint, perseverance and willpower. Antitobacco sweets, nicotine patches, hypnotic suggestion - all these are only secondary measures that do not have high returns.

Switching to electronic cigarettes does not create big shocks for the body. This is achieved by preserving the smoker's reflex. Analog substitute does not externally differ from the tobacco original, it is also held, clamped between the fingers, and manipulated by it. The main difference is that with the invariance of the ritual, it is not the principle of action that changes, but its content. When smoking e-cigarettes, a person inhales water vapor, rather than smoke, into his lungs only a small amount of nicotine, and not combustion products.

instagram stories viewer

E-cigarettes: what is it?

Externally, electronic counterparts are similar to conventional tobacco products. The internal design is not very complex and consists of several elements included in a single process. In order to learn how to fill an electronic cigarette, you need to study the principle of its operation. Inside the case is an evaporator with a nichrome spiral connected to the battery. During the tightening, the thread heats up and turns the aromatic liquid into steam, which the smoker inhales.

We select the simulator for ourselves

The choice of electronic analogs should be based on the optimal combination of several parameters:

  • size;
  • frequency of use;
  • control method;
  • fortress;
  • flavorings.

Let us dwell in more detail on the consideration of each of the conditions.

Analog models of cigarettes vary in size in several types: super-mini, mini and pen-style. They look like tobacco cigarettes, but differ in length and thickness. In addition, there are also electronic cigars and tubes, in appearance and size fully compatible with tobacco analogues.

In terms of duration of use, all e-cigarettes are divided into two types: disposable and reusable. The first option is of low cost and suitable for those who rarely smoke or decided for the first time to try a new taste. The battery in the probe is unable to recharge, so the question of how to fill a one-time electronic cigarette, you can give only one answer: no way. After the consumption of aromatic liquid, the cigarette should be simply discarded.

In reusable products, it is possible to replace consumables. Charging an electronic cigarette is to recharge the battery from an ordinary electrical network. An empty container with an aromatic liquid easily changes a new one.

How to operate an e-cigarette

The process of steam generation is manual and automatic. In the first case, an analog cigarette is activated by pressing the starter, which is usually located on the outer casing. For continuous steam generation, the button must be kept constantly on. After the starter key is released, the cigarette ceases to function.

Automatic cigarette is convenient in that it works immediately after the first tightening. With his inhalation, the smoker sends a signal to the microprocessor, which immediately starts the evaporation system. Automatic cigarette is easy to use and does not distract the attention of a person from the main actions.

The choice of a suitable variant of e-cigarettes is affected by the nicotine content, which provides the appropriate level of strength( from 0 to 24 mg / ml).When you become the owner of an electronic antitobacco analogue, you will inevitably have a question about what and how to fill an electronic cigarette. Taste preferences can be satisfied with a variety of flavors, among which the most popular are tobacco, mint, fruit.

How does the electronic device

Unlike tobacco products, the e-cigarette does not burn and does not emit toxic fumes. Instead, it just produces a fragrant steam. In the process involved several main components:

  • battery power( battery);
  • atomizer( evaporator);
  • cartridge with aromatic liquid and nicotine;
  • switch sensor( for automatic devices).

The principle of operation of an e-cigarette with autocontrol is similar to that of a steam humidifier. At the moment of tightening, the aromatic-nicotine liquid, rapidly heated, turns into steam, which enters the lungs of the smoker. When the system is turned on, the mini-processor inside the battery is the first to operate. He starts the work of the atomizer and simultaneously sends a signal to the tip of the cigarette, where the LED simulator burns.

The evaporator spiral is instantly heated and heats the aromatic liquid in the cartridge. The smoker inhales the vapors resulting from the process. Stopping puffs is a signal for the built-in sensor that stops the cigarette. The presence of this important element significantly reduces the capacity of the battery.

Cigarette with manual control

Unlike automatic devices, the hand cigarette is activated by pressing a special starter. From a practical point of view, the manual version has more benefits than the automatic model. Its obvious advantages:

  • control of steam production;
  • high quality steam;
  • powerful battery power supply;
  • convenience of cleaning the atomizer.

The technological process for the production of electronic cigarettes is in constant development. A new generation of anti-smoking counterparts differs by a more sophisticated internal device, consisting of two main elements: a battery and a cartomizer. The last detail is a symbiosis of the evaporator and a replaceable cartridge. The compact size of the new element allows you to increase the amount of battery that allows you to generate more thick and saturated steam.

Proper operation of the electronic simulator

A reusable e-cigarette needs technical support and regular care in the same way as any household appliance. Each element of the device has a certain lifetime, the duration of which is influenced by additional factors:

  • frequency of e-cigarette use;
  • intensity and depth of puffs;
  • cleaning period of the atomizer.

How to fill an electronic cigarette? Two-thirds of each cigarette is a rechargeable battery. The miniature dimensions of the device do not allow placing a powerful source of energy inside the case. Depending on the type of cigarette and frequency of use, the battery is able to provide continuous operation in the offline mode for 5-6 hours. After that, the electronic cigarette is charged( by analogy with a mobile phone).The fact that the battery is discharged indicates a rapid flashing of the indicator. In a new electronic product, the first charge should be at least 8 hours, for the next 2-3 hours is enough.

How do I refill an e-cigarette cartridge? The signal to the fact that the fragrant liquid has come to an end, will be a changed taste of steam. If an unpleasant, burning taste develops in the mouth, this means that the absorbent element inside the cartridge begins to burn. During use, it is advisable to periodically check the filling capacity of the replaceable container, not allowing full evaporation. If you need to change the taste of a cigarette, then before that, the absorbent element should be washed with running water and dried. Preventive cleaning should be done after every fifth refueling.

The liquid for electronic smoking is sold in packages of 15 and 30 ml each. To fill the tank, you must first remove the absorbent from there. You can also introduce aromatic dressing with a syringe or medical pipette. All actions should be cautious and unhurried to prevent overflow of liquid.

Features of individual

models

The idea of ​​creating electronic cigarettes came to us from China. In 2003, the invention was patented there and the first issue was set up. The technological novelty had unprecedented success and spread widely throughout the world in a short period of time. Today many leading countries produce electronic devices under different brands. The main production of cigarettes still belongs to the Celestial Empire.

The company Joye Ego is one of the most successful representatives of the industry engaged in the integrated production of electronic simulators. In addition to the main products, the company produces a wide range of accessories and components. The products of Joye Ego are so popular all over the world that they push dealers to mass production of fakes.

How to refuel an electronic cigarette Joyetech? Models of the Chinese manufacturer are the most in demand because of the perfect combination of product sizes, quality steam and ease of use. During the development of the latest versions of electronic imitators, manufacturers focused on improving the aesthetic and technical properties of electronic products.

How to fill an electronic cigarette Evod? Refilling the cartridge and charging the battery is according to the scheme described in the article above. It is not necessary to fill the cartridge with the liquid to the very edges, it is better to fill the container by two thirds. After pouring, you need to shake the cartomizer several times so that the liquid is evenly distributed over the evaporator. That there were no failures at operation of e-cigarettes, it is desirable to buy completing elements of original manufacturers.

Those who decide to buy an electronic cigarette for the first time can immediately become confused by the variety of species. You should start with the simplest models to gradually understand the device, the rules of care and then choose the most suitable option for yourself.