What are the best dentures to put, if there are no teeth at all?
Modern dentistry works wonders. However, keeping teeth in old age is not so simple. In any case, there is a need for prosthetics. At the moment there is a wide range of products. But, despite this, many do not know which dentures are best to put. Dentists' comments show that any particular type of product has its own merits and, of course, disadvantages. All this must be taken into account in the process of selecting the material.
Varieties of dentures
To answer the question about which dentures are best to put, it is necessary to take into account several factors. It is very important. First of all, the construction should not partially, but completely restore the function of lost teeth. In addition, the choice of the method of prosthetics depends on the financial possibilities, and should also be based on the objectives pursued. First, you need to understand what dental prostheses exist. Which is better to put, help determine the dentist. Here are the main varieties of dentures:
- Metallic. As a rule, they are made of steel or gold.
- Metal Ceramic.
- Combined. In this case, the face of the prosthesis can be made of plastic, and the reverse side - made of metal.
It should be noted that dentures are made not only from different materials, but also come in different shapes. They can be made in the form:
- Single crown.
- Artificial structures.
To determine which dentures are considered the best, it's not so simple. Each of the varieties has its own advantages and peculiarities. The main difference is not only in the cost of finished structures, but also in aesthetic qualities.
Do not forget that dentures are of several basic types: removable and non-removable. They also have significant differences. First of all, non-removable structures are fixed on the teeth by the dentist only for a certain period of time.
Which removable dental prosthesis is better to put
First of all, it is necessary to determine which orthopedic system is needed. Removable structures are classified into several main groups. Among them:
- conditionally removable;
- partially removable;
- complete removable.
The assortment of such products is quite large, and when choosing a design, one should listen to the opinion of specialists. The above types of prostheses have their own peculiarities. The choice of a certain orthopedic design depends on how much the whole healthy teeth remain in the oral cavity. In this case, the product must fully perform its functions and not cause a sense of discomfort.
Removable prostheses complete
If it is possible to hook the orthopedic structure, then the dentist can install only the clasp system. It differs not only in aesthetic appearance, but also in good quality. But which dentures are better to put, if there are no teeth at all? In this situation, complete removable structures are suitable. This is the only alternative for the adentition of both or one jaw. These structures are made, usually from nylon or acrylic. It should be noted that the technology of making dentures has undergone some changes. As a result, the products have become more durable and neat. Advanced models are now more practical and lack such disadvantages as unreliable fixation in the oral cavity, as well as unsatisfactory appearance.
Dental prostheses, manufactured by modern technology, have a high level of wear resistance. With proper care and compliance with all hygiene rules, these orthopedic structures can last for a long enough period of time. In this case, the appearance, as well as the color and density of the products will remain virtually unchanged. It should be noted that complete removable structures have recently been made taking into account all the wishes of the client and, of course, the individual characteristics of the oral cavity.
Reliable fixation is important
So, what are the best dentures to put with the loss of all teeth, figured out. However, many patients doubt the reliability of fixing complete removable structures. In order for the prosthesis to hold securely, they should be placed on implants that are implanted in the jaw. Of course, there is a more expensive option. In this case, dentures are installed, which are equipped with special suckers. However, such constructions are not recommended to be placed on the lower jaw, which differs from the upper one by greater mobility. It should be noted that removable dentures look no worse than natural teeth. Adaptation to similar products proceeds quickly and painlessly.
Acrylic or nylon?
Which dentures are considered the best today: acrylic or nylon? It is quite difficult to answer this question unambiguously. To understand this and understand which dentures are best to put, you should consider all the advantages and disadvantages of products.
- Flexibility and, of course, lightness. These indicators affect the strength of structures. For example, nylon dental prostheses, thanks to the material, are very flexible, soft and light. However, such structures are very difficult to break. In terms of flexibility and strength, acrylic dentures are inferior to nylon. But similar designs can keep shape long. In addition, acrylic dentures have a low weight.
- Hygiene. This indicator is of particular importance for many. Nylon orthopedic constructions do not emit smell, are not toxic, and also do not absorb moisture. Acrylic dentures have an exclusively porous structure. It is because of this that a large number of bacteria accumulate on their surface, which are capable of causing the development of inflammatory processes in the oral cavity.
- Appearance. What kind of dentures should I put on, so that they do not stand out? Nylon designs are best suited for color and shape. In addition, they are able to maintain an aesthetic appearance for a long time. The disadvantage of these prostheses is the transmission of teeth at the junction. As for acrylic removable structures, they can be selected not only in shape, but also in color.
- Hypoallergenicity. In this regard, nylon structures have good biocompatibility, which can not be said about acrylic dentures. They can cause local and general allergic reactions.
- Price. Nylon removable dentures are more expensive than acrylic. The problem is that they are made abroad. If we compare the cost of implantation and the installation of removable dentures, then the cost of the last method of prosthetics can be called democratic.
Removable Partial Systems
Which dentures are best placed on chewing teeth with a partial loss? In this case, use partial removable structures. Such dentures are made on plastic or metal frames. They allow you to fill the gaps that occur after the loss of teeth. Most often they are installed:
- in those situations where adjacent teeth can not be used as a support for the installation of the bridge;
- with a significant series defect. For example, in the absence of several teeth in a row;
- as a temporary measure, while a more reliable and qualitative design is manufactured.
There are several main types of removable prostheses:
- immediate prosthesis;
- segment, or sector, removable structures;
- products on telescopic crowns;
- clasp systems;
- plastic plate prostheses.
Plate plastic designs: features of
Which dentures should be better positioned as a temporary measure? Some experts recommend the use of plastic lamellar structures. Their cost is relatively low. However, in the process of chewing food such systems do not provide the correct distribution of the load on the gums. The positive side of such structures is a simple fixing. If necessary, you can independently remove and then replace the denture. This allows us to carry out its hygienic treatment without any help from others.
As a rule, plastic plate prostheses are used solely to restore missing teeth. In fact, these are the simplest orthopedic structures that have a low cost. By their basis, such systems rely on the surface of the gums and are held by the nearest supporting teeth thanks to metal hooks - clasps.
Also in dentistry, temporary implant prostheses are used as temporary structures.
Bugel systems - therapeutic dentures
What are the best designs for a shortage in the row of just a few teeth? Of course, the clasp systems. They are considered comfortable and reliable even with prolonged use. The main feature of the designs is the uniform distribution of mechanical loads on the gums and the remaining teeth when chewing food.
Features of the
clasp systems The basis for the clasp systems is the frame, which is a metal arch with all fastening, fixing and functional elements. This part of the construction is made only individually and by the method of high casting. Make a framework of high-strength alloys, for example, from titanium, gold platinum and chromocobalt.
These prostheses are installed with mobility of teeth, periodontal disease and as a medical device.
Other types of removable dentures
There are situations when only one side of the dentition falls out. In such situations, removable sectors are usually installed. These are one-sided designs, which are attached by special hooks, or attachments.
If there is not one of the teeth in the row, which dentures are better to put? Photos of patients after installation of conditionally removable structures confirm that such systems are able to return an aesthetic look to a smile. Typically, these orthopedic systems are made of plastic or ceramic. They look natural and not striking. Orthopedic structures of such a plan are fixed with special locks to the supporting teeth. The attachments are built into the crowns. The main disadvantage of conditionally removable prostheses is that it is impossible to get them yourself. It can only be done by a dentist.
Non-removable orthopedic structures
In addition to removable dentures, there are systems that are attached exclusively to a specific place. They completely restore the chewing function and perfectly replace the missing fragments of the series. However, such designs have one drawback - they can not be removed by themselves. Only the dentist can do this with the help of special tools. Such prostheses are not removable. There are several main types:
- dental crowns;
Which prosthesis is best: removable or non-removable
Several factors should be considered to make the right choice:
- The number of teeth lost. For example, if there is no one or two, then you can resort to implantation, install a conditionally removable prosthesis or a crown.
- Fixed constructions much better restore chewing function. To get an attractive smile, you should use conditionally removable dentures or install veneers.
- Removable structures must be periodically removed and cleaned and processed, as they fit tightly to the surfaces of the gums, thus creating hard-to-reach places for the brush.
- Cost. Many methods of prosthetics require considerable expenses. If the financial situation does not allow, you will have to choose from inexpensive methods. The most budgetary option - a metal solid cast crowns or removable systems made of plastic.